The drive Samsung SSD 840 PRO Series has logged 116 CRC error(s) on its SATA interface. These are bus-level transmission errors and indicate a connection problem, not a fault with the drive itself. Common causes are a loose, damaged, or low-quality SATA cable, a faulty SATA port, or a flaky backplane or drive sled. The counter is cumulative over the drive's whole lifetime, so these errors may be years old and come from an issue that has long been resolved.
If the count is still increasing, reseat the SATA data cable, try a different SATA port, and replace the cable if errors continue to accumulate.
Your processor is using noticeably more power than expected for this model. It is currently drawing 161 W, which is over +20 % above typical values. This extra power leads to higher temperatures and unnecessary electrical stress on the CPU.
Such behavior may occur when power limits are raised, when boost settings are too aggressive, or when the motherboard automatically applies performance-enhancing profiles. Even if you haven’t changed any settings, some systems push the processor harder than its usual base limits.
We recommend checking your power settings in the BIOS or software provided by your motherboard. Reducing power limits can help lower temperatures, improve efficiency, and prevent premature wear.
The drive HGST HDS724040ALE640 has accumulated 71,361 hours of powered-on time, about 8.1 years, far beyond the 5-year design service life typical for hard drives.
Field data shows hard drive failure rates climbing steeply once a drive is several years past its rated service life. At this age, a mechanical or electronic failure can occur with little or no SMART warning.
Back up any important data on this drive now and plan its replacement. A drive this old should no longer be trusted as the only copy of anything valuable.
We detected 1 storage device(s) that are not partitioned or formatted. The affected device(s) are: Samsung SSD 860 PRO 2TB. Windows cannot use these drives until they are initialized and set up.
Open the Disk Management tool to initialize the device(s), create a partition, and format the drive so it becomes usable.
Scan this QR code
To open this page on your phone
Previous validations from this PC
Unexpected crashes (BSOD)
No unexpected crashes (BSOD) recorded on this PC.
Boot Time details
Hardware errors (WHEA)
No hardware errors recorded in the Windows event log.
Driver problems
No driver problems detected.
Flagged processes
59 running processes, none flagged.
Inform a support service
If a partner support service is helping you with this PC, enter the service code they gave you to send them this validation. A valid service code is required.