Your RAM is currently operating at a lower frequency than it was designed for. It is running at 2400 MT/s, while its rated speed is 4404 MT/s.
This doesn’t cause issues, but you may miss out on some performance.
Enabling the proper memory profile (XMP/EXPO/DOCP) in the BIOS usually restores the RAM to its intended speed. It’s optional, but adjusting this setting can help your system run a bit faster.
Your graphics driver has not been updated in over 6 months. You are running version 560.94, released 22 months ago, while a much newer version (582.78) is available.
Such an outdated driver can cause crashes, instability, and serious performance issues.
Updating to the latest driver is strongly recommended to ensure compatibility and stability. Download the latest drivers for your graphics card here: NVIDIA Drivers
The processor did not sustain the frequency it reported during the test. The measured clock was 5300 MHz but the highest effective clock was significantly lower, below the threshold required for a valid result.
The effective clock counts the cycles actually executed. A gap like this means the processor was throttled by the hardware during the test, most often because it hit its thermal limit, sometimes a power or current limit.
Check the cooling system (dust, fan operation, thermal paste, airflow) and the power limits set in the BIOS, then run the validation again once the processor can hold its frequency.
Scan this QR code
To open this page on your phone
CPU clocks
Last sample and peak over the test, values in MHz
| Clock | Current | Peak |
|---|---|---|
| Cores | ||
| #0 | 5299.97 | 5300.18 |
| Uncore / BCLK | ||
| L3 Cache #0 | 5299.93 | 5300.18 |
| L3 Cache #1 | 1622.20 | 1622.28 |
| CPU BCLK | 100.00 | 100.00 |
Previous validations from this PC
Unexpected crashes (BSOD)
No unexpected crashes (BSOD) recorded on this PC.
Hardware errors (WHEA)
42 errors recorded in the Windows event log, showing the 10 most recent.
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Bus error, level 3, core 0
Driver problems
No device needs attention, 3 more ignored.
Flagged processes
11 running processes, none flagged.
Inform a support service
If a partner support service is helping you with this PC, enter the service code they gave you to send them this validation. A valid service code is required.