Dump [8ghzpeag] Submitted by Jthellfireluxx -
Intel(R) Core(TM) i9-14900KS
5998.56 MHz
ASUS ROG MAXIMUS Z790 APEX ENCORE · 32 GB DDR5-8598 · NVIDIA GeForce RTX 5090
Warning
CPU-Z 3.02.0
Date:
Type: Quick Check
Duration: 5 seconds
System Analysis
4 Warnings 2 Info

Your processor's power limits (PL1/PL2) appear to be set to an unlimited value. This means the CPU is allowed to draw as much power as it wants, with no enforced safeguard beyond what the cooling and voltage regulation can sustain. While this can unlock maximum performance, the processor may run hotter, consume more energy, and experience increased electrical stress over time.

This configuration is often applied automatically by motherboard manufacturers through performance-enhancing profiles. Even without any user changes, many boards ship with these limits effectively disabled by default.

We recommend reviewing your power limit settings in the BIOS or in the software provided by your motherboard. Restoring sensible PL1/PL2 values (typically aligned with the processor's rated TDP) can help lower temperatures, reduce power consumption, and extend the long-term reliability of your CPU.

6 device(s) have no driver installed, so Windows cannot use them at all. This is very common on a fresh Windows installation, where the chipset drivers have not been installed yet.

Windows ships generic drivers for common hardware but not for chipset controllers, card readers, or manufacturer-specific devices, which have to be installed separately.

Install the chipset driver package for your motherboard or laptop from the manufacturer's support page, then run Windows Update. The Drivers button in the Software section lists every device still waiting for a driver.

Your processor is currently operating with fewer threads than its official specifications. It is running with 8 threads, while this CPU normally supports 32 threads.

This limitation reduces performance and may indicate a configuration issue.

This situation can happen when Windows is set to limit the number of active cores, when BIOS settings are not at their defaults, or when a recent change has disabled certain CPU features. In rare cases, a BIOS update may be required for the system to properly detect the full capabilities of the processor.

We recommend checking Windows’ advanced boot options (msconfig) to ensure all cores are enabled. You should also load the default settings in your BIOS to restore proper CPU configuration.

Your processor runs microcode revision 0x10E, older than the 0x12B revision that fixes a known stability and degradation issue on this CPU family.

Intel 13th and 14th generation Core processors could receive excessive voltage from the BIOS, which causes crashes and permanent damage over time. The fix is delivered through a microcode update included in newer BIOS versions.

Update the motherboard BIOS to the latest version from the manufacturer, then check that the microcode revision has changed. Until then, keep the BIOS power and voltage settings at their defaults (Intel Default Settings).

Your graphics driver has not been updated in over 6 months. You are running version 595.79, released 8 months ago, while a much newer version (621.24) is available.

Such an outdated driver can cause crashes, instability, and serious performance issues.

Updating to the latest driver is strongly recommended to ensure compatibility and stability. Download the latest drivers for your graphics card here: NVIDIA Drivers

This PC encountered 5 unexpected crash(es) (BSOD, blue screen) in the 30 days before this validation, the most recent on 2026-11-14.

Crashes like these are often caused by a faulty driver, unstable overclocking or memory settings, overheating, or failing hardware.

Make sure Windows and your drivers are up to date. If the PC is overclocked, try returning to stock settings. The BSOD Details button in the Software section lists each crash.

01 Processor (CPU)
Max. Frequency
6000 MHz
L3 Cache
36 MB
Peak temp
29 °C
0100 °C
PL1/PL2 unlocked
Power (TDP)
203 W
TDP 150 W
0203 W
CPU Name
Intel(R) Core(TM) i9-14900KS
Cores & Threads
1 CPU | 8 Cores | 8 Threads
Frequency
5998.56 MHz (60 * 99.98 MHz) - Max Turbo: 6000.00 MHz
Multiplier
Current: 60 | Min: 8 | Max: 62
Architecture
Raptor Lake | Stepping: B0 | Technology: 10 nm
CPUID / Ext.
6.7.1 | 6.B7
IA Extensions
MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX, AVX2, FMA3, SHA
L1 Data Cache
8 x 48 KB (12-way, 64-byte line)
L1 Instruction Cache
8 x 32 KB (8-way, 64-byte line)
L2 Cache
8 x 2 MB (16-way, 64-byte line)
L3 Cache
36 MB (12-way, 64-byte line)
Microcode
Rev. 0x10E
TDP
150 W / PL1: 4095 W / PL2: 4095 W
Temperature
Current: 29°C | Max: 29°C | TjMax: 100°C
Type
Retail
02 Motherboard
Model
ASUS ROG MAXIMUS Z790 APEX ENCORE
Socket
LGA1700
North Bridge
Intel Raptor Lake rev 01
South Bridge
Intel Z790 rev 11
BIOS
American Megatrends International LLC. A.I1 (09/02/2024)
03 Memory (RAM)
Total Capacity
32 GB
Channels
128 bits
Dual Channel
Effective Speed
DDR5-8598
4299 MHz
Memory Slots (2 / 2)
PATRIOT
16 GB
S0
PATRIOT
16 GB
S1
Total Size
32768 MB (32 GB)
Type
Quad Channel (128 bit) DDR5-SDRAM
Frequency
4299 MHz (DDR5-8598) - Ratio: 1:43
Timings
36-49-49-34-83-2 (tCAS-tRCD-tRP-tRAS-tRC-tCR)
Slot #1 Module
16 GB Patriot Memory 8200 Series (WW29'25)
Slot #2 Module
16 GB Patriot Memory 8200 Series (WW29'25)
04 Graphic Card (GPU)
GPU Clock
2017 MHz
GPU VRAM
32 GB
Peak GPU temp.
227 °C
0100 °C
GPU Name
NVIDIA GeForce RTX 5090 - Manufacturer: MSI
GPU Frequency
2017 MHz (Turbo: 2730 MHz)
GPU Specifications
Process: 4 nm / Transistors: 92.2 B / Die Size: 720 mm² / TDP: 575 W
GPU Units
Cores: 21760 | Texture (TMU): 1360 | Render (ROP): 176
GPU VRAM
32 GB GDDR7 (Samsung) | 512-bit Bus @ 14001 MHz
GPU Drivers
NVIDIA GeForce Driver 595.79 | Version 32.0.15.9579 (03/04/2026)
05 Storage
C:\SPCC M.2 PCIe SSD (FW: SN015772)
32% usedTotal 931 GiB
Drive
SPCC M.2 PCIe SSD (FW: SN015772)
Capacity
931 GiB (~1000 GB)
Type
Fixed SSD - Bus: NVMe PCIe 4x 4.0 (16 GT/s)
Partition
C:\ - Size: 930.8GB (32.4% used)
Run Time
Power Cycles: 922 | Power-On: 433 h (~18 days) | 6.7 TBW
Health
Remaining Life: 99% | Media Errors: 0 | Temperature: 30°C
06 Display
Monitor
HP X27i (W39'2020)
Specifications
27.2 inches (69.1 cm) | 2560 x 1440 pixels (QHD) @ 48-144 Hz
Current Mode
1920 x 1080 pixels | 59 Hz
07 Software
Operating System
Microsoft Windows 11 (0xBF) (x64) - 24H2 | Installed on 2025-11-28
Security
Secure Boot: Enabled | TPM: Enabled (V2.0 hardware)
Features
Code Integrity: Enabled | Fast Startup: Enabled
Power Plan
Custom (128c4576) | 7 plans defined
Boot Time
60 seconds (POST: 16 s. | Logon: 21 s. | Startup: 23 s.)
Stability
5 unexpected crashes (BSOD) detected
Drivers
6 devices have no driver installed
Processes
25 running processes
CPU-Z Version
3.02.0.x64
CPU-Z SCREENSHOT Warning [8ghzpeag]
Tools
CPU-Z BENCHMARK
Version 2017.1 (x64)
Your position (multi-thread)
YOU
5,289
Intel Core Ultra 7 268V
4,809
Intel Core Ultra 7 256V
4,437
Intel Core Ultra 7 258V
4,392
Intel Core Ultra 9 288V
4,375
Forum Banner
[url=https://valid.cpuid.com/8ghzpeag][img]https://valid.cpuid.com/cache/banner/8ghzpeag.png[/img][/url]
Join us on Discord
Join our Discord