The drive WD PC SN810 SDCQNRY-1T00-1014 has spent 15 minute(s) operating at or above its critical temperature threshold (typically 80–85°C). At these temperatures the controller is forced to throttle aggressively to avoid permanent damage, which causes severe performance loss and accelerates wear.
Improve airflow around the drive, add a heatsink if possible, and verify it is not installed near a heat source. Sustained critical thermal events shorten the drive's lifespan significantly.
This PC encountered 5 unexpected crash(es) (BSOD, blue screen) in the 30 days before this validation, the most recent on 2026-11-03.
Crashes like these are often caused by a faulty driver, unstable overclocking or memory settings, overheating, or failing hardware.
Make sure Windows and your drivers are up to date. If the PC is overclocked, try returning to stock settings. The BSOD Details button in the Software section lists each crash.
Scan this QR code
To open this page on your phone
CPU clocks
Last sample and peak over the test, values in MHz
| Clock | Current | Peak |
|---|---|---|
| Cores | ||
| #0 | 5092.94 | 5099.97 |
| #1 | 4992.59 | 5099.97 |
| #2 | 5092.94 | 5098.08 |
| #3 | 5017.67 | 5073.09 |
| #4 | 4992.59 | 5049.97 |
| #5 | 4992.59 | 5024.97 |
| #6 | 4992.59 | 5024.97 |
| #7 | 4992.59 | 5074.97 |
| Uncore / BCLK | ||
| CPU BCLK | 100.35 | 100.35 |
Previous validations from this PC
Unexpected crashes (BSOD) (5)
Boot Time details
Hardware errors (WHEA)
2 errors recorded in the Windows event log.
Bus error, level 1, instruction execution, address 0xAB8D2000
TLB error, level 1, address 0x1E8B2000
Driver problems
No device needs attention, 2 more ignored.
Flagged processes
36 running processes, none flagged.
Inform a support service
If a partner support service is helping you with this PC, enter the service code they gave you to send them this validation. A valid service code is required.