The drive WD_BLACK SN850X 2000GB has spent 8 minute(s) operating at or above its critical temperature threshold (typically 80–85°C). At these temperatures the controller is forced to throttle aggressively to avoid permanent damage, which causes severe performance loss and accelerates wear.
Improve airflow around the drive, add a heatsink if possible, and verify it is not installed near a heat source. Sustained critical thermal events shorten the drive's lifespan significantly.
The drive WD_BLACK SN850X 2000GB has spent 8 minute(s) operating at or above its critical temperature threshold (typically 80–85°C). At these temperatures the controller is forced to throttle aggressively to avoid permanent damage, which causes severe performance loss and accelerates wear.
Improve airflow around the drive, add a heatsink if possible, and verify it is not installed near a heat source. Sustained critical thermal events shorten the drive's lifespan significantly.
The drive Samsung SSD 990 PRO 4TB has spent 16 minute(s) operating above its warning temperature threshold (typically 70°C). The drive is still functional but is running hotter than its manufacturer recommends for sustained operation, which gradually shortens its lifespan.
Check airflow and cooling around the drive. Adding a heatsink or improving case ventilation usually resolves this.
The drive WD_BLACK SN850X 4000GB has spent 8 minute(s) operating at or above its critical temperature threshold (typically 80–85°C). At these temperatures the controller is forced to throttle aggressively to avoid permanent damage, which causes severe performance loss and accelerates wear.
Improve airflow around the drive, add a heatsink if possible, and verify it is not installed near a heat source. Sustained critical thermal events shorten the drive's lifespan significantly.
We detected 1 storage device(s) that are not partitioned or formatted. The affected device(s) are: WDC WD60EZAX-00C8VB0. Windows cannot use these drives until they are initialized and set up.
Open the Disk Management tool to initialize the device(s), create a partition, and format the drive so it becomes usable.
Windows reports 1 device(s) that are not working correctly. A device in this state is either unavailable or running in a degraded mode, and Windows will keep retrying it at every boot.
This usually comes from a driver that failed to load or was stopped after an error: a bad or outdated driver, a device that is not seated properly, or a component that is starting to fail.
Open the Device Manager to see which devices are flagged, then reinstall or update their drivers from the manufacturer's website. If a device keeps failing after a clean driver install, reseat it and test it on another port or slot. The Drivers button in the Software section lists every affected device.
Scan this QR code
To open this page on your phone
Previous validations from this PC
Unexpected crashes (BSOD)
No unexpected crashes (BSOD) recorded on this PC.
Boot Time details
Hardware errors (WHEA)
No hardware errors recorded in the Windows event log.
Driver problems
1 device needs attention.
Flagged processes
78 running processes, none flagged.
Inform a support service
If a partner support service is helping you with this PC, enter the service code they gave you to send them this validation. A valid service code is required.